Vintage Glass Glitter

Add a subtle and enchanting touch of vintage sparkle and texture with these glass glitter shards and ultra fine glitter! Each jar (3 ounces) is filled with enough glistening glitter to enhance a multitude of projects. Each color fades in direct sunlight for an even more vintage look.

Warning: This product is Sharp Glass (not a toy.) Please handle with care and gloves to prevent cutting or injury. NOT for use by children.

Hats Off To You
by Mona Gettmann (project was inspired by artist Jennifer Jenson's project in the "Paper Cachet" by Making Memories (5PP-26588) on page 45)

Measure up 1 1/2" from the bottom of a clean plastic frosting container and cut away excess with scissors. Turn the trimmed container over and attach a circle of batting to the trimmed container. Trace the container dimensions onto a sheet of Provo Craft Paper - Blue Party Dots (5PR-42-4827) paper and cut into a slightly larger circle. Snip the circle repeatedly up to the traced lines. Place the circle onto the top of the container and glue the tabs onto the sides of the container. Cut a 3" strip from a sheet of Provo Craft - Brick Diamond (5PR-42-4841) paper and fold in half. Glue the folded strip to the outside and inside of the container, trimming off any excess paper, as shown. Cut three 1" strips from the Blue Party Dots paper and fold the strips in half. Glue one strip around the container and create a bow effect with the two remaining strips, as shown. Glue the paper bow to the container. Apply glue to the top of the covered container and sprinkle with Diamond Dust Fine Clear Glass Glitter (5AG-613) and tap off excess. Apply glue to the paper bow and band on the container and sprinkle with Krystallos Clear Glass Shards Glitter (5AG-901). Tap off the excess. Using Designer Dries Clear Glue by Art Glitter (5AG-DDC02) edge the top and bottom edges of the container and sprinkle with Glass Glitter. Tap off excess and set aside to dry. Cover both sides of a cardboard panel with Brick Diamond paper. Trim the panel into a large circle. Edge the circle with the glue and glitter, as before. Attach the covered container to the circle with a small hinge from Brass Hinges (5KC-558090 - Discontinued) using ribbon or brads to create a hatbox effect. Attach a three inch strip of Pink Provo Craft - Pink Party Dots (5PR-42-4828) paper and Blue Party Dots paper together back to back. Using decorative scissors cut out three circles that are slightly smaller than the hatbox. Using Misunderstood Foam Alphabet Set (5MA-26096) and brown ink, stamp the words hats off to you on the circles, as shown. Edge the circles with brown chalk. Punch holes in the circles, as shown. Attach small copper eyelet stickers from Copper Brads & Eyelets (5ST-AC623C - Discontinued) over the holes. Place lengths of ribbon from Spring Fibers & Ribbon (5FLSPFIB) through the holes and tie into knots. Trim the ends of the ribbons. Place the circles into the hatbox.

You’re So Sweet
by Mona Gettmann

Cut out sentiment panel from Heartwarming Vintage - Collage Sheet - Halloween Time (5HV-HVC6). Attach the cutout to a black panel and trim closely. Apply narrow double-sided tape strips to the top and bottom edges of the cutout. Apply Amber Shards Glitter (5AG-908) and tap off excess. Sprinkle Onyx Fine Glitter (5AG-610) onto the tape and tap off excess. Tear two panels from polka-dot patterned paper from Sublime 6” x 6” Paper Pad (5KC-624467) and sponge the torn edges with black ink. Stamp honeycomb from Collage Cube (C8418) with black ink on the rounded tag from Sublime Mini Pocket & Tags (5KC-580503). Attach the two prepared panels diagonally to the top and bottom edges of the tag and trim the edges. Sponge burnt orange ink along the edges of the tag. Using Rolling Stamp - Circa 12 pt. (5PR-42-8064) and black ink, stamp the word Halloween repeatedly on the two panels on the tag. Mount the prepared sentiment panel to the tag with foam tape. Attach a strip of 12"x12" Black Fine Weave (5MM-140024). Using roller stamp and black ink, stamp the words Happy Halloween on a torn edge a torn-edge patterned-paper strip from Sublime Paper Pad. Sponge green ink along the edges of the strip. Attach the strip to the pocket. Attach a narrow double-sided strip of tape to the bottom portion of the pocket and sprinkle with the same glitters as before. Tie a length of orange floss to the tag and slip the tag into the pocket. Cut out a cat image from the Heartwarming Vintage - Collage Sheet - Halloween Time with decorative scissors. Sponge black ink along the edges of the cutout. Attach a panel of Black Magic Mesh to a green panel cut from the Sublime Paper Pad. Mount the cat cutout to the panel with foam tape. Using double-sided tape, attach the prepared panel to an acetate bag. Fill the bag with candy. Tie a length of Twill Tape - 1/2" Lightweight (5TT-1/2KIT) around the top of the bag and attach the prepared pocket and tag, as shown.