Pocket Watch Casing

These well-made petite metal Pocket Watch casings have a glass face to protect and show-off your most precious diminutive mementos, photos, and more! Create tiny vignettes by layering papers, collage images and embellishments. Wear them as pendants or include in an element to another art project as a special focal point! Access is through the stainless steel backing that twists off. Available in two colors (1 1/8" diameter).

Baby
by Mona Gettmann

Tear off the back inside panel of three Single Slide Mailers (5PS-SLIDE1). Cut off two front panels from the prepared pieces. Cover both sides of one of the the back panels and the intact front with inside panel piece with blue patterned paper.Using a baby text Roll-On Transfer, apply design to the prepared inside panels, back panel and front panels, as shown. Let cure 24 hours. Stamp Congratulations from Greetings Collection (G1069) twice with blue ink on the left inside panel. Sand the edges of the panels with an emory board. Edge all the prepared pieces with a silver pen. Cut a photo into a circle the dimensions of the inside panel of a Pocket Watch - Nickel (5SM-NICKEL) and glue to back panel. Let dry. Attach front Watch piece to the back panel. Wrap a blue ribbon from Navy Ribbon Pack (5MA-23198 5KC-62417) around the top portion of the watch piece and into a bow. Loop a blue gingham ribbon from the Navy Ribbons around the hanger on the watch. Glue the prepared slide mailer panels together, layering the prepared top panel with a second and third inside panel. Place the ribbons on the watch between the third inside panel and the back panel. Glue together, but don’t place glue under the ribbons, in this way the watch and ribbon can be removed and worn as a necklace. Staple the ribbon to the center of the back panel. Attach Foof-a-la - Claret Small Foof-a-bet (5FF-41014) letter stickers to the front panel, spelling baby’s name. Wrap the ends of the ribbon around the front panel. Tie the ends into a bow for a closure.